| |
VVC fitting service for Rover Metro/100
|
|
| Specification |
Remove old engine and gearbox
Refit new engine with flywheel and NEW clutch (pressure plate, cover plate and release bearing)
Plumb in water, fuel and servo pipes
Modify necessary wiring, including coolong fan circuitry and ECU/5AS alignment
Refill all fluids (engine oil, gearbox oil, anti-freeze etc)
Note: The price for this service does NOT include the engine, engine wiring harness or ECU
|
|
| Price £800.00 |
Delivery N/A |
Fitting Available N/A |
| |
VVC to Metro/Rover 100 Jack-In Wiring Harness
|
|
| Specification |
Takes all the hassle out of wiring your VVC engine into your Metro
Looms available for MEMS2 and MEMS3 engines into both Rover Metros and Rover 100s
All looms include wiring to drive original Metro cooling fan
Full ECU/MEMS/Plip alignment service available
Note: Looms vary from engine to engine and car to car hence prices will vary. Ring for details.
|
|
Price £150.00 Maximum
Price Postage : £9.00
|
Delivery 7 Days |
Fitting Available Yes |
| |
MEMS Code Generator
|
|
| Specification |
Negates the need for a 5AS when doing a Metro engine conversion
Does not require a plip so eliminates possible lost plip / flat battery problems
Compatible with MEMS1.9, MEM2J and MEMS3 ECU's
Simple 3 wire device. Connect and fit in minutes
Note: This unit still needs aligning to your ECU. Alignment is included in the price.
|
|
Price £90.00
Price Postage : £7.00
|
Delivery 7 Days |
Fitting Available Yes
|
Metro/Rover 100 Hydrogas Individualising Kit
|
|
| Specification |
2 front hydrogas extension pipes for easy access, rated to 700 psi
2 Schroeder valves for front pipes, rated to 1000 psi
2 modified rear pipes, tapped and fitted with blanking plugs
Note: We need your existing rear pipes (cut off after the valve) in exchange
Note: A £40.00 surcharge will be applied if you want to exchange AFTER fitting the kit
|
|
Price £115.00 Exchange
Price Surcharge : £40.00
Price Postage : £5.00
|
Delivery 7 Days |
Fitting Available Yes |
| |
Custom 2 Core Radiator and Cowling
|
|
| Specification |
Custom made 2 core radiator to improve engine cooling
Includes glass fibre cowl with built in cooling fan mountings
Uses original metro cooling fan which is ample for VVC installations
No slam panel or chassis rail modifications required
|
|
Price Parts : £195.00
Price Postage : £10.00
|
Delivery Ex Stock |
Fitting Available Yes |
Lightweight (2.9Kg) Fibreglass Bonnet for Rover Metro
|
|
| Specification |
Glass Fiber Bonnet for Rover Metro supplied ready to paint
Includes manifold cooling vent and expanded aluminium mesh
Must be fitted with bonnet pins / fairing fasteners
Can be supplied ready painted if required
Weight quoted is unpainted and is subject to manufacturing tolerances
|
|
Price Bonnet : £100.00
Price Postage : £15.00
|
Delivery Ex Stock |
Fitting Available Yes |
Lightweight (2.9Kg) Fibreglass Bonnet for Rover 100
|
|
| Specification |
Glass Fiber Bonnet for Rover 100 supplied ready to paint
Recessed manifold cooling vent
Must be fitted with bonnet pins / fairing fasteners
Can be supplied ready painted if required
Weight quoted is unpainted and is subject to manufacturing tolerances
|
|
Price Bonnet : £100.00
Price Postage : £15.00
|
Delivery Ex Stock |
Fitting Available Yes |
Lightweight (2.7Kg) Fibreglass Tailgate for Rover Metro and Rover 100
|
|
| Specification |
Glass Fibre Tailgate for Rover Metro and Rover 100 supplied ready to paint
Accepts standard boot lock moulding to provide number plate lights
Must be fitted with bonnet pins / fairing fasteners
Can be supplied ready painted if required
Weight quoted is unpainted and is subject to manufacturing tolerances
|
|
Price Tailgate : £100.00
Price Postage : £15.00
|
Delivery Ex Stock |
Fitting Available Yes |
Rear Wheel Arch Cover Trims
|
|
| Specification |
Glass Fiber rear wheel arch cover trims
Supplied in white or black, ready to paint
Can be supplied ready painted if required
Designed to cover a repaired arch to negate painting the whole rear quarter
Currently available for 2 door vehicles only
Note: This is NOT a repair panel, the arch MUST be repaired before fitting
|
|
Price Per pair : £45.00
Price Postage : £7.00
|
Delivery Ex Stock |
Fitting Available Yes |
Big Brake Conversion Kit
|
|
| Specification |
Conversion kit to allow fitment of Rover 200 front calipers
Includes 260mm vented discs, brackets, spacers, bolts and washers
Does NOT include calipers
Requires 14" rims minimum. Will NOT fit with original Metro 13" rims
Note: No drilling required however hubs will require tapping to M14 to fit this kit
|
|
Price Per pair : £145.00
Price Postage : £7.00
|
Delivery Ex Stock |
Fitting Available Yes |
Adjustable Shock Absorbers (Front)
|
|
| Specification |
Developed by ourselves in conjunction with LEDA suspension
Designed specifically to operate in conjunction with Hydragas suspension
23 position adjustment
Large adjuster knobs for ease of use
Note: These units are 'handed' and must be ordered as a pair
|
|
Price Per pair : £295.00
Price Postage : £10.00
|
Delivery 7 Days |
Fitting Available Yes |
| |
2" Steel Exhaust System with 3" Stainless Tail Pipe
|
|
| Specification |
Specifically designed to give correct flow and back pressure for 1.8VVC engines
Also works with 1.4, 1.6, and 1.8 Non VVC engines
2" road legal steel system with 3" stainless steel tail pipe
Requires original Metro catalytic convertor or de-cat pipe
88dB at 4200RPM (measured on a 160 VVC)
DOES NOT INCLUDE DOWNPIPE
|
|
Price Cat back : £175.00
Price Postage : £15.00
|
Delivery Ex Stock |
Fitting Available Yes |
|
)
)
)
)
)
)
)
)
)
)
)